ABB REG670 - Functionality

15.2.2 Functionality
Trip matrix logic TMAGAPC function is used to route trip signals and other logical
output signals to different output contacts on the IED.
The trip matrix logic function has 3 output signals and these outputs can be connected
to physical tripping outputs according to the specific application needs for settable
pulse or steady output.
15.2.3 Function block
TMAGAPC
BLOCK
BLK1
BLK2
BLK3
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
INPUT8
INPUT9
INPUT10
INPUT11
INPUT12
INPUT13
INPUT14
INPUT15
INPUT16
INPUT17
INPUT18
INPUT19
INPUT20
INPUT21
INPUT22
INPUT23
INPUT24
INPUT25
INPUT26
INPUT27
INPUT28
INPUT29
INPUT30
INPUT31
INPUT32
OUTPUT1
OUTPUT2
OUTPUT3
IEC13000197-1-en.vsd
IEC13000197 V1 EN
Figure 373: TMAGAPC function block
15.2.4 Signals
Table 492: TMAGAPC Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of function
BLK1 BOOLEAN 0 Block of output 1
BLK2 BOOLEAN 0 Block of output 2
Table continues on next page
1MRK502052-UEN B Section 15
Logic
799
Technical manual