ABB REG670 - Page 811

15.4 Logic for group warning WRNCALH
15.4.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic for group warning WRNCALH - -
15.4.2 Functionality
The group warning logic function WRNCALH is used to route several warning
signals to a common indication, LED and/or contact, in the IED.
15.4.3 Function block
WRNCALH
BLOCK
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
INPUT8
INPUT9
INPUT10
INPUT11
INPUT12
INPUT13
INPUT14
INPUT15
INPUT16
WARNING
IEC13000182-1-en.vsd
IEC13000182 V1 EN
15.4.4 Signals
Table 500: WRNCALH Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of function
INPUT1 BOOLEAN 0 Binary input 1
INPUT2 BOOLEAN 0 Binary input 2
INPUT3 BOOLEAN 0 Binary input 3
INPUT4 BOOLEAN 0 Binary input 4
INPUT5 BOOLEAN 0 Binary input 5
INPUT6 BOOLEAN 0 Binary input 6
INPUT7 BOOLEAN 0 Binary input 7
INPUT8 BOOLEAN 0 Binary input 8
Table continues on next page
1MRK502052-UEN B Section 15
Logic
805
Technical manual