ABB REG670 - Technical Data

15.4.7 Technical data
Table 503: Number of WRNCALH instances
Function
Quantity with cycle time
3 ms 8 ms 100 ms
WRNCALH - - 5
15.5 Logic for group indication INDCALH
15.5.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic for group indication INDCALH - -
15.5.2 Functionality
The group indication logic function INDCALH is used to route several indication
signals to a common indication, LED and/or contact, in the IED.
15.5.3 Function block
IEC13000183-1-en.vsd
INDCALH
BLOCK
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
INPUT7
INPUT8
INPUT9
INPUT10
INPUT11
INPUT12
INPUT13
INPUT14
INPUT15
INPUT16
IND
IEC13000183 V1 EN
1MRK502052-UEN B Section 15
Logic
807
Technical manual