ABB REG670 - Signals

15.5.4 Signals
Table 504: INDCALH Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of function
INPUT1 BOOLEAN 0 Binary input 1
INPUT2 BOOLEAN 0 Binary input 2
INPUT3 BOOLEAN 0 Binary input 3
INPUT4 BOOLEAN 0 Binary input 4
INPUT5 BOOLEAN 0 Binary input 5
INPUT6 BOOLEAN 0 Binary input 6
INPUT7 BOOLEAN 0 Binary input 7
INPUT8 BOOLEAN 0 Binary input 8
INPUT9 BOOLEAN 0 Binary input 9
INPUT10 BOOLEAN 0 Binary input 10
INPUT11 BOOLEAN 0 Binary input 11
INPUT12 BOOLEAN 0 Binary input 12
INPUT13 BOOLEAN 0 Binary input 13
INPUT14 BOOLEAN 0 Binary input 14
INPUT15 BOOLEAN 0 Binary input 15
INPUT16 BOOLEAN 0 Binary input 16
Table 505: INDCALH Output signals
Name
Type Description
IND BOOLEAN OR function betweeen inputs 1 to 16
15.5.5 Settings
Table 506: INDCALH Group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - Off Operation Off / On
15.5.6 Operation principle
The logic for group indication INDCALH block is provided with 16 input signals and
1 IND output signal. The function block incorporates internal logic OR gate in order
to provide grouping of connected input signals to the output IND signal from the
function block.
Section 15 1MRK502052-UEN B
Logic
808
Technical manual