ABB REG670 - Function Block

15.7.6.1 Function block
ORQT
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
OUT
NOUT
IEC09000298-1-en.vsd
IEC09000298 V1 EN
Figure 392: ORQT function block
15.7.6.2 Signals
Table 561: ORQT Input signals
Name Type Default Description
INPUT1 BOOLEAN 0 Input signal 1
INPUT2 BOOLEAN 0 Input signal 2
INPUT3 BOOLEAN 0 Input signal 3
INPUT4 BOOLEAN 0 Input signal 4
INPUT5 BOOLEAN 0 Input signal 5
INPUT6 BOOLEAN 0 Input signal 6
Table 562: ORQT Output signals
Name
Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
15.7.6.3 Technical data
Table 563: Number of ORQT instances
Logic block
Quantity with cycle time
3 ms 8 ms 100 ms
ORQT - 20 100
15.7.7 Pulse timer function block PULSETIMERQT
The pulse timer function block (PULSETIMERQT) can be used, for example, for
pulse extensions or for limiting the operation time of the outputs. PULSETIMERQT
has a settable output pulse length.
Section 15 1MRK502052-UEN B
Logic
828
Technical manual