IEC140000140 V1 EN-US
Figure 32: Drop-down menu with commands for testing the PMU
• Switch to the Protocol Specific tab. Here, all the IEEE C37.118 message types
can be seen. If the HeaderFrame is not included, ask the PMU to send the header
frame via the Send Header Frame command (Previous stage). Open each message
type and observe the content of each message.
1MRK 502 073-UUS A Section 11
Establishing connection and verifying the IEEE C37.118/1344 communication
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 117
Commissioning manual
To Next Page
Loading...
