ABB REJ603 - Page 9

Self-powered feeder protection
1MDB07217-YN
REJ603
Product version: 3.0
Issued: 2017-11-21
Revision: E
9 ABB
Table 12. Environmental conditions
Description
Value
Operating temperature range
-25...+55ºC
Short-time service temperature range
-40...+85ºC (<16 h)
Display viewable range : above -20 ºC up to
+70 ºC
Relative humidity
< 93%, non-condensing
Atmospheric pressure
86...106 kPa
Altitude
up to 2000 m
Transport and storage temperature range
-40...+85ºC
Table 13. Environmental tests
Description
Type test value
Reference
Dry heat test (humidity < 50% )
 Working
 Storing
96 h at +70°C
96 h at +85°C
IEC 60068-2-2
Dry cold test
 Working
 Storing
96 h at -25°C
96 h at -40°C
IEC 60068-2-1
Damp heat test, cyclic
2 cycles (12 h + 12 h) at
+25°C…+55°C,
Rh > 93%
IEC 60068-2-30
Change of temperature test
Cyclic : 3 hours at -25°C + 3
hours at +55°C ,
Number of cycles : 5
IEC 60068-2-14
Table 14. Electromagnetic compatibility tests
Description
Type test value
Reference
1 MHz/100 kHz burst disturbance test:
 Common mode
 Differential mode
2.5 kV, 400/40 pulses/s
1.0 kV, 400/40 pulses/s
IEC 61000-4-18, class III
IEC 60255-26
Electrostatic discharge test:
 Contact discharge
 Air discharge
4 kV, 150 pF/330 Ω
6 kV, 150 pF/330 Ω
IEC 61000-4-2
Conducted radio frequency interference
tests:
10 V
f=150 KHz...80 Mhz
10 V
f=27, 68 MHz
Not applicable for low energy trip
output
IEC 60255-26
IEC 61000-4-6