23
Technical data Chapter 2
General
Case size A B C D E F G H J K
6U, 1/2 x 19” 265.9 223.7 242.1 252.9 205.7 190.5 203.7 - 186.6 -
The H and K dimensions are defined by the 19” rack mounting kit. All dimensions are in millimeters.
Panel cut-outs for REx 500 series, single case
Flush mounting Semi-flush mounting
Case size
Cut-out dimensions (mm)
A+/-1 B+/-1
6U, 1/2 x 19” 210.1 254.3
C = 4-10 mm
D = 16.5 mm
E = 187.6 mm without rear protection cover, 228.6 mm with rear protection cover
F = 106.5 mm
G = 97.6 mm without rear protection cover, 138.6 mm with rear protection cover
A
B
C
D
E
xx02000665.vsd
F
G
xx02000666.vsd
To Next Page
Loading...
