ABB REL 551-C1*2.5 - I;O System Configurator; Application; Logic Diagram

38
I/O system configurator Chapter 3
Common functions
4 I/O system configurator
4.1 Application
The I/O system configurator must be used in order for the terminal’s software to recognize added
modules and to create internal address mappings between modules and protections and other
functions.
4.2 Logic diagram
Figure 12: Example of an I/O-configuration in the graphical tool CAP 531 for a REx 5xx with
two BIMs.
IOP1-
S11
S14
S15
S16
S17
S18
S13
S12
S19
S20
S21
S23
S22
I/OPosition
S24
S25
S26
S27
S28
S30
S32
S34
S36
IO01-
IO02-
I/O-module
I/O-module
POSITION ERROR
BI1
BI6
.
.
.
POSITION ERROR
BI1
BI6
.
.
.
en01000143.vsd