5.4 Load Profile tool
Load Profile tool is used for reading load profile records of COMTRADE format from a
protection relay, clearing old records and viewing records via an external COMTRADE
viewer. The default viewer included with PCM600 is Wavewin, but a third party viewer
can be used.
5.4.1 Opening and closing Load Profile tool
• To open the Load Profile tool, click Load Profile Tool on the context menu of an IED
node inside the PCM600 project tree.
Section 5 1MAC108982-MB E
Protection and control engineering
92 615 series ANSI
Engineering Manual
To Next Page
Loading...
