GUID-F8120497-31C8-4F8B-BBE8-D1338CF4E4E6 V1 EN
Figure 59: Opening the Load Profile tool
• To close the Load Profile tool, click the Close button in the tool.
The Load Profile tool runs in the same process as PCM600 but in a separate window.
Multiple instances of the tool can be run at the same time. Any open tool instances are
closed without confirmation when PCM600 is closed.
1MAC108982-MB E Section 5
Protection and control engineering
615 series ANSI 93
Engineering Manual
To Next Page
Loading...
