The Fault Record tool is a connectivity package tool. The main functionality is divided
into three parts: reading the fault record parameters from the protection relay, displaying
their names, values and units on the user interface and saving them to a text file. It is also
possible to clear all the fault records from both the tool and the protection relay and copy
the fault records either individually or all at once to a word processor.
5.5.2 Fault Record tool interface
GUID-6E8576DB-7917-45FE-A54A-877A9892E83C V1 EN
Figure 64: Fault record tool
Section 5 1MAC108982-MB E
Protection and control engineering
98 615 series ANSI
Engineering Manual
To Next Page
Loading...
