ABB Relion 615 series - Section 6 LHMI Engineering; Single-Line Diagram Engineering; Diagrams in Graphical Display Editor

Section 6 LHMI engineering
For information on LED operation modes supported by the protection
relay, see the technical manual.
6.1 Single-line diagram engineering
A single-line diagram of the protection relay can be designed by using the Graphical
Display Editor tool of PCM600. The single-line diagram is modelled according to the IEC
61850 standard in the Graphical Display Editor.
6.1.1 Diagrams in Graphical Display Editor
The Graphical Display Editor is used for various tasks.
• Creating HMI display raster layouts
• Adding static text
• Adding measurands
• Adding busbars
• Adding symbols onto display page
• Drawing lines (creating a link)
• Adding buttons to control ACT application with SPCGGIO
1MAC108982-MB E Section 6
LHMI engineering
615 series ANSI 105
Engineering Manual