GUID-4606198B-521D-4804-BBC8-8E041E144026 V1 EN
Figure 73: Adding a measurand object to an LHMI view
2. In the Objects Properties view, edit the name, unit and the number of decimals.
Unit text specifies the default text used for the measurement's unit. If the Unit text
is empty in the Graphical Display Editor, no unit is shown. If the Unit text is not
empty, the unit in the protection relay is updated dynamically based on the signal it
is connected to. The Scale factor parameter is not used.
Uncheck the option Place Symbol at available space in the
Graphical Display Editor menu to allocate more space for symbols
near measurands.
6.1.1.9 Adding a busbar
1. Add at least two Busbar Junction elements from the Symbol Library to the display
page.
2. Select the Busbar Junction and use the rotate command from the toolbar to ensure
that the busbar ends to the margin.
3. Add links between the busbar junctions.
1MAC108982-MB E Section 6
LHMI engineering
615 series ANSI 113
Engineering Manual
To Next Page
Loading...
