9. Check that the correct function block is selected.
Function blocks of the same type can have different instance numbers.
GUID-F21E4F43-442D-4868-BAA3-EBA903E9C62E-ANSI V1 EN
Figure 79: Graphical Display Editor: establishing a dynamic object link
10. Ensure that all links are done.
11. Save the complete picture.
12. Write to the IED.
13. Validate the single-line diagram on the protection relay.
6.2 Template export and import
The single-line diagram templates enable the reuse of the single-line diagram created in
the Graphical Display Editor tool. The single-line diagram can be exported as a template
and the same template can be imported to another IED. The file extension of the single-line
diagram template file is .psld.
Section 6 1MAC108982-MB E
LHMI engineering
120 615 series ANSI
Engineering Manual
To Next Page
Loading...
