6.2.1 Exporting a template
1. Create a single-line diagram in the Graphical Display Editor tool.
2. On the menu bar, point to Graphical Display Editor and select Export Display
Pages as a Template, or on the File menu, point to Display Editor Template and
click Export.
3. Once the display page is selected, click Export.
The File save dialog box appears.
4. Browse the location to export the template and provide the file name.
The default file name is the bay name+date.
By default, single-line diagram templates are saved in the drive where
PCM600 is installed <Drive:> \PCMDataBases\GDE\Templates\<IED
type folder>.
6.2.2 Importing a template
1. On the menu bar, point to Graphical Display Editor and select Import Display
Pages from Template or on the File menu, point to Display Editor Template and
click Import.
The Import GDE Template window appears with two sections, List of Templates
and Display Pages Preview.
2. Click Browse to select the template files.
The templates available in the folder appear in the List of Templates section.
3. Select a template file to preview the display pages available in the template file.
4. Once the display pages are selected, click Import to import the display page.
Multiple pages can be selected for the Import function.
6.3 HMI event filtering
HMI Event Filtering is a tool that helps in configuring visibility of events shown on the
LHMI and WHMI of the IED. This tool does not modify the actual events on the protocol
level, it only modifies the event visibility on the LHMI and WHMI.
1MAC108982-MB E Section 6
LHMI engineering
615 series ANSI 121
Engineering Manual
To Next Page
Loading...
