The event tree view is used to modify the visibility of the events shown on the LHMI and
WHMI. Events in the tree view are structured in the same way as functions in the PCM600
plant structure.
GUID-21867F5D-E9C4-45E3-95D4-F16F2BEF16CF V1 EN
Figure 80: HMI event filtering interface
6.3.1 Starting HMI event filtering
Start HMI event filtering in one of the alternative ways.
• Right-click an IED and select HMI Event Filtering.
• On the Tools menu, click HMI Event Filtering.
6.3.2 Setting visibility of HMI events
1. Browse the event tree for the event.
Event nodes in the tree have more detailed description in the tool tip.
2. Select or clear the check box next to the event name to specify it's visibility.
Section 6 1MAC108982-MB E
LHMI engineering
122 615 series ANSI
Engineering Manual
To Next Page
Loading...
