One data can be included in the GOOSE data set only once.
4.2. Define the client IEDs for each GOOSE control block.
4.3. Link the IEDs to the GOOSE control block that is to receive the GOOSE
control block.
5.
Export the updated SCD file.
[1]
All data sets, Report Control Blocks and GOOSE control blocks
must be located in LLN0.
7.3.3 Importing SCL files to PCM600
The IED engineering tool must be able to receive an SCD file or an ICD file as an import
to receive the engineered communication extensions, for example, for the different IEDs.
To be able to import an SCD file at station level, the option IED 61850 configuration
engineering mode enabled has to be cleared in PCM600.
1. On the Tools menu, select Options and click IEC 61850 Configuration.
2. Clear the option IED 61850 configuration engineering mode enabled and click
OK.
GUID-3C811FF5-97F7-4703-81EE-A0C4AC30C8D0 V1 EN
Figure 91: Enabling SCD file import at station level
1MAC108982-MB E Section 7
IEC 61850 communication engineering
615 series ANSI 141
Engineering Manual
To Next Page
Loading...
