GUID-81D555F9-0F22-4112-BF6D-48F2A3376612-ANSI V1 EN
Figure 10: PCM600: IEC 61850 signal designation concept
The created technical key for the full path name of the IED would be: AA1J1Q01A1.
• AA1 = substation in the project
• J1 = voltage level from 20 to 30 kV
• Q01 = the first bay in the voltage level
• A1 = first IED in the bay Q01
Section 3 1MAC108982-MB E
PCM600 tool
34 615 series ANSI
Engineering Manual
To Next Page
Loading...
