3.6.1 Prerequisites for local and remote updates
Local update
• Use of the front port is recommended when updating locally. Remove the IED from
the network especially with redundant network topologies (HSR/PRP).
Remote update
• Communication is recommended to be secured either by setting up a VPN connection
or enabling secure communication in the IED via LHMI (Configuration/
Authorization/Remote Update) while updating remotely.
• Remote update can be enabled in the IED either via the LHMI (Configuration/
Authorization/Security/Remote Update) or by an administrator in the Parameter
Setting tool in PCM600 (IED Configuration/Configuration/Authorization/
Remote Update to be able to update remotely. If the IED is in local control mode,
remote update proceeds only after a confirmation is received from the user.
• Remote update has to be disabled manually after the update, if wanted.
• Remote update only works when the IED is connected from the rear port with a
custom IP address.
3.6.2 Updating firmware or language
1. Select the update mode.
• Firmware
• Language
2. Select the update package and click Next.
Section 3 1MAC108982-MB E
PCM600 tool
40 615 series ANSI
Engineering Manual
To Next Page
Loading...
