1. In the Plant Structure view, right-click the bay and select Import.
A .pcmi file can be imported only when the bay is selected in the
plant structure.
GUID-187F89B8-CF8B-457B-A6C2-09E3FF34E929-ANSI V1 EN
Figure 35: Importing IED configuration
2. In the Import dialog box, select the .pcmi file to be imported and click Open.
After importing, the IED object is created in the plant structure.
After the .pcmi file has been imported, the IP address, the name and the technical key that
correspond to the physical IED have to be changed.
1MAC108982-MB E Section 4
Setting up a project
615 series ANSI 63
Engineering Manual
To Next Page
Loading...
