settings, for example, in a substation with several protection relays, ensure
that the names of the export files identify the protection relay to which the
file should be imported.
The parameter import/export functionality is available via the File menu when the
Parameter Setting tool is open.
GUID-4A63FE0D-7846-4387-A5D3-BD7B4F519A76 V2 EN
Figure 56: Parameter import/export
5.2.5 Parameter organization
The organization of parameters into a tree structure becomes visible in the Plant
Structure by expanding the setting tree.
5.3 Signal Matrix tool
The Signal Matrix tool is used to make cross-references between the physical I/O signals
and function blocks and for the GOOSE signal input engineering.
The Application Configuration tool is used for adding or removing
function blocks, for example, GOOSE receiving function blocks.
1MAC108982-MB E Section 5
Protection and control engineering
615 series ANSI 89
Engineering Manual
To Next Page
Loading...
