ABB Relion 615 series - Time and Reason for Latest Protection Relay Reset; User-Definable Bits [Alt.2], Visible on 0 X,1 X,3 X and 4 X

RegA Type Scale IEC 61850 name SA name Description Values
LD0.LPHD1
2054 u16 1 .NumPwrUp.stVal Num. of cold starts 0...65535
2055 u16 1 .WrmStr.stVal Num. of warm starts 0...65535
2056 u16 1 .WacTrg.stVal Num. of watchdog resets 0...65535
LD0.LDEV1
2057 u16 1 .ChgAckCnt.stVal Num. of conf. changes 0...65535
LD0.LLN0
u16 1 .ParChgCnt.stVal Num. of setting changes 0…65535
1) See the technical manual.
2.4.1.24 Time and reason for latest protection relay reset
Table 147: Time and reason for latest protection relay reset
RegA Type Scale IEC 61850 name SA name Description Values
9221 u16 1 Year 2000...2999
9222 u16 1 Month 1...12
9223 u16 1 Day 1...31
9224 u16 1 Hour 0...23
9225 u16 1 Minute 0...59
9226 u16 1 Second 0...59
9227 u16 1 Millisecond 0…999
9228 u16 1 Reset reason
9228.0 Bit - bit 0 1=Cold start
9228.1 Bit - bit 1 1=Watchdog
9228.2 Bit - bit 2 1=Warm start
2.4.1.25 User-definable bits [Alt.2], visible on 0x,1x,3x and 4x
Table 148: User-definable bits [Alt.2], visible on 0x,1x,3x and 4x
BitA
Type Scale IEC 61850 name SA name Description Values
(0) Bit < not mappable - not visible >
1 Bit Usr reg 1.Bit 01
2 Bit Usr reg 1.Bit 02
3 Bit Usr reg 1.Bit 03
: : :
: : :
Table continues on next page
1MAC252756-MB B Section 2
Modbus data mappings
REM615 ANSI 85
Point List Manual