2.4.1.36 LD0.PEMMXU1 Power measurement demand values (1) – P, E-1
Table 159: LD0.PEMMXU1 Power measurement demand values (1) – P, E-1
RegA
Type Scale IEC 61850 name SA name Description Values
LD0.PEAVMMXU1 Demand value
1939 i32 1 .TotW.mag Active power P (high) -/+ 999,999
1940 (Low word)
1941 i32 1 .TotVAr.mag Reactive power Q (high) -/+ 999,999
1942 (Low word)
1943 i32 1 .TotVA.mag Apparent power S (high) -/+ 999,999
1944 (Low word)
1945 i16 1000 .TotPF.mag Power factor -1…1
LD0.PEMAMMXU1 Max demand value
i32 1 .TotW.mag Active power P -/+ 999,999
i32 1 .TotVAr.mag Reactive power Q -/+ 999,999
i32 1 .TotVA.mag Apparent power S -/+ 999,999
LD0.PEMIMMXU1 Min demand value
i32 1 .TotW.mag Active power P -/+ 999,999
i32 1 .TotVAr.mag Reactive power Q -/+ 999,999
i32 1 .TotVA.mag Apparent power S -/+ 999,999
2.4.1.37 LD0.PEMMXU1 Three-phase power and energy measurement (1) – P, E-1
Table 160: LD0.PEMMXU1 Three-phase power and energy measurement (1) – P, E-1
RegA
Type Scale IEC 61850 name SA name Description Values
LD0.PEMMXU1
161 i32 1 .TotW.instMag P_INST Total active power P (high) -/+ 999,999
162 .TotW.instMag (low word)
163 i32 1 .TotVAr.instMag Q_INST Total reactive power Q (high) -/+ 999,999
164 .TotVAr.instMag (low word)
165 i32 1 .TotVA.instMag S_INST Total apparent power S (high) -/+ 999,999
166 .TotVA.instMag (low word)
167 i16 1000 .TotPF.instMag PF_INST Average power factor -1...1
Section 2 1MAC252756-MB B
Modbus data mappings
90 REM615 ANSI
Point List Manual