ABB Relion 615 series - Default I;O Connections

3.7.2.1 Default I/O connections
Table 33: Default connections for analog inputs
Analog input
Description Connector pins
IA Phase A current X120:7-8
IB Phase B current X120:9-10
IC Phase C current X120:11-12
IG Residual current IG X120:13-14
VA(2) Phase voltage VA(2) X130:7-8
VB(2) Phase voltage VB(2) X130:9-10
VC(2) Phase voltage VC(2) X130:11-12
VA(1) Phase voltage VA(1) X130:13-14
VB(1) Phase voltage VB(1) X130:15-16
VC(1) Phase voltage VC(1) X130:17-18
Table 34: Default connections for binary inputs
Binary input Description Connector pins
BIO0005 BIO0007
X110-BI1 - X110:1-2 X110:1,5
X110-BI2 - X110:3-4 X110:2,5
X110-BI3 - X110:5-6 X110:3,5
X110-BI4 - X110:7-6 X110:4-5
X110-BI5 Circuit Breaker 2 closed position indication X110:8-9 X110:6,10
X110-BI6 Circuit Breaker 2 open position indication X110:10-9 X110:7,10
X110-BI7 Circuit Breaker 1 closed position indication X110:11-12 X110:8,10
X110-BI8 Circuit Breaker 1 open position indication X110:13-12 X110:9-10
X120-BI1 - X120:1-2
X120-BI2 - X120:3-2
X120-BI3 - X120:4-2
X120-BI4 - X120:5-6
X130-BI1 - X130:1-2
X130-BI2 - X130:3-4
X130-BI3 - X130:5-6
Section 3 1MAC109016-MB C
REF615 standard configurations
166 REF615 ANSI
Application Manual