ABB Relion 615 series - Ground Voltage; Sensor Inputs; Auxiliary Supply Voltage Input

Table 43: Phase voltage inputs included in configuration P
Terminal Description
X130:7-8 VA(2)
X130:9-10 VB(2)
X130:11-12 VC(2)
X130:13-14 VA(1)
X130:15-16 VB(1)
X130:17-18 VC(1)
Table 44: Reference voltage input for SECRSYN1 included in configuration N
Terminal Description
X130:9-10 V12B
5.1.1.4 Ground voltage
Table 45: Additional residual voltage input included in configurations F and N
Terminal Description
X130:17-18 VG
5.1.1.5 Sensor inputs
Table 46: Combi sensor inputs included in configuration L
Terminal
Description
X131 IA
VA
X132 IB
VB
X133 IC
VC
5.1.2 Auxiliary supply voltage input
The auxiliary voltage of the protection relay is connected to terminals X100:1-2. At DC
supply, the positive lead is connected to terminal X100:1. The permitted auxiliary voltage
range is marked on the LHMI of the protection relay on the top of the HMI of the plug-in
unit.
Section 5 1MAC109016-MB C
Protection relay's physical connections
202 REF615 ANSI
Application Manual