ABB Relion 615 series - Standard Configuration F; Applications; Functions

3.4 Standard configuration F
3.4.1 Applications
The standard configuration includes directional overcurrent and directional ground-fault
protection with phase voltage based measurement, undervoltage and overvoltage
protection and measurement function. The configuration is mainly intended for cable and
overhead-line feeder applications in directly or resistance grounded distribution
networks. The configuration also includes additional options for selecting ground-fault
protection based on admittance, wattmetric or harmonic-based principles.
The protection relay with a standard configuration is delivered from the factory with
default settings and parameters. The end-user flexibility for incoming, outgoing and
internal signal designation within the protection relay enables this configuration to be
further adapted to different primary circuit layouts and the related functionality needs by
modifying the internal functionality using PCM600.
3.4.2 Functions
Δ
3
79
5
50G-1
1
Available with Admittance-based earth fault option
2
Available with Wattmetric-based earth fault option
3
Available with Harmonic-based earth fault option
4
Available with Arc Flash Detection(AFD) option
5
Available with Reclosing option
6
Available with RTD option
3
52
AFD-
3
4
AFD-
1
4
AFD-
2
4
3
Υ or Δ
51N-1
21YN-
1
1
21YN-
2
1
67/
51P-1
67/
51P-2
67/
50P-1
50
BF-1
67/
51N-1
67/
51N-2
21YN-
3
1
50P-3
REF615 V5.0 FP1 ANSI Func Appl F
46-1
32N-1
2
67NIEF
HIZ 32N-3
2
32N-2
2
51NHA
3
67/
50N-1
46-2 46PD 49F-1 59G
27-1
27-2
27-3
47-1
47U-1
59N-2
59N-1
INR-1
59-3
59-2
59-1
3
38
6
60-1
GUID-F91FF16B-BB2C-4919-868F-39EF29BAE01B V1 EN
Figure 53: Functionality overview for standard configuration F
1MAC109016-MB C Section 3
REF615 standard configurations
REF615 ANSI 67
Application Manual