The measurements can be seen from the LHMI and they are available under the
measurement option in the menu selection. Based on the settings, function blocks can
generate low alarm or warning and high alarm or warning signals for the measured current
values.
The frequency measurement FMMXU1 of the power system and the three-phase power
and energy measurement PEMMXU1 are available. Load profile record LDPRLRC1 is
included in the measurements sheet. LDPRLRC1 offers the ability to observe the loading
history of the corresponding feeder.
CMMXU1
O:167|T:5|I:1
BLOCK HIGH_ALARM
HIGH_WARN
LOW_WARN
LOW_ALARM
GUID-555CF15B-E63F-4255-8A9C-56A40B55B637 V1 EN
Figure 90: Three-phase current measurement
GUID-0320BC79-07E5-4801-B7D9-E2368BDAA20E V1 EN
Figure 91: Sequence current measurements
RESCMMXU1
O:169|T:5|I:1
BLOCK HIGH_ALARM
HIGH_WARN
GUID-C64219A5-3141-4198-875A-14DE3D413AA8 V1 EN
Figure 92: Ground current measurements
VMMXU1
O:9|T: 5|I:1
BLOCK HIGH_ALARM
HIGH_WARN
LOW_WARN
LOW_ALARM
GUID-BC1AC3EC-B164-4AA0-8DC2-5B006FF790BE V1 EN
Figure 93: Three-phase voltage measurement
GUID-96F5FDA2-3854-47B8-B49C-BF095963B8DE V1 EN
Figure 94: Sequence voltage measurements
1MAC109016-MB C Section 3
REF615 standard configurations
REF615 ANSI 93
Application Manual
To Next Page
Loading...
