ABB Relion 615 series - CTRL.LLN0 Local Remote Station off; DR.RDRE1 Disturbance Recorder Values; LD0.LPHD1 System Values; LD0.PEMMTR1 Power Measurement and Accumulated Power Values

2.3.3.16 CTRL.LLN0 Local remote station off
Table 112: CTRL.LLN0 Local remote station off
IEC 61850 name SA name Description Values S Arg 1,2,3,4
CTRL.LLN0
.LocRem.stVal -
Off=0; Loc=1; Rem=2;
Station=3 0…3 R 0,3,0,3
2.3.3.17 LD0.LPHD1 System values
Table 113: LD0.LPHD1 System values
IEC 61850 name SA name Description Values S Arg 1,2,3,4
LD0.LPHD1
.NumCmpChg.stVal - Num.of comp. changes 0…65535 R 0,65535,0,65535
.NumPwrUp.stVal - Num.of power ups 0…65535 R 0,65535,0,65535
.PhyHealth1.stVal Warning Warning code 0…65535 R 0,65535,0,65535
.PhyHealth2.stVal Internal Fault Internal fault code 0…65535 R 0,65535,0,65535
.WacTrg.stVal - Num.of watchdog resets 0…65535 R 0,65535,0,65535
.WrmStr.stVal - Num.of warm starts 0…65535 R 0,65535,0,65535
2.3.3.18 LD0.PEMMTR1 Power measurement and accumulated power values
Table 114: LD0.PEMMTR1 Power measurement and accumulated power values
IEC 61850 name
SA name Description Values S Arg 1,2,3,4
LD0.PEMMTR1
.DmdVArh.actVal ER_RV_ACM Forward reactive energy 0…1e10 R 0,1E10,0,1E10
.DmdWh.actVal EA_RV_ACM Forward active energy 0…1e10 R 0,1E10,0,1E10
.SupVArh.actVal ER_FWD_ACM Reverse reactive energy 0…1e10 R 0,1E10,0,1E10
.SupWh.actVal EA_FWD_ACM Reverse active energy 0…1e10 R 0,1E10,0,1E10
.TotPF.instMag PF_INST Average power factor -1…1 R -1,1,-100,100
.TotW.instMag P_INST Active power 0…999999 R 0,999999,0,999999
.TotVA.instMag S_INST Apparent power 0…999999 R 0,999999,0,999999
.TotVAr.instMag Q_INST Reactive power 0…999999 R 0,999999,0,999999
2.3.3.19 DR.RDRE1 Disturbance recorder values
Table 115: DR.RDRE1 Disturbance recorder values
IEC 61850 name
SA name Description Values S Arg 1,2,3,4
DR.RDRE1
.FltNum.stVal - Number of recordings 0…65535 R 0,65535,0,65535
.MemUsed.stVal - Rec. memory used 0…100 [%] R 0,100,0,100
Section 2 1MRS756711 D
DNP3 data mappings
44 REF615
Point List Manual