ABB Relion 615 series - Securing the Handle

1
2
GUID-8158C704-BD99-42EB-A495-6BD015C240CD V1 EN
Figure 4: Sealing screw
1 Sealing screw
2 Sealing wire and seal
4.2.4 Securing the handle
The front panel of the IED has an integrated sealing screw. By default, the screw is
screwed all the way in and not used when installing or detaching the plug-in unit.
Instead of sealing the plug-in unit, the sealing screw and the spacer supplied with
the IED can be used for securing the handle in place.
1. Fully open the sealing screw and remove it.
2. Re-insert the sealing screw with the spacer.
1MRS756375 K Section 4
Mounting
615 series 17
Installation Manual