ABB Relion 615 series - Semi-Flush Mounting the IED Inclined

A
B
C
D E
F
A070591 V4 EN
Figure 11: Semi-flush mounted IED
A 186 mm
B 177 mm
C 201 mm
D 103 mm
E 98 mm
F 160 mm
Check the allowed minimum bending radius from the optical cable
manufacturer.
4.3.4 Semi-flush mounting the IED inclined
A mounting kit is needed for semi-flush mounting the IED inclined. In addition to
the detailed mounting instructions, the mounting kit includes:
• Angle frame
• Gasket
• Screws
Requirements for installation:
1MRS756375 K Section 4
Mounting
615 series 25
Installation Manual