ABB Relion 615 series - Rack Mounting the IED and Test Switch RTXP to a 19 Equipment Frame

A
A070594 V4 EN
Figure 18: Wall mounted IED in rotated position
A
455 mm
Minimum of 50 mm space is needed above and below the frame for
rotating.
4.3.7 Rack mounting the IED and test switch RTXP to a 19”
equipment frame
A mounting kit is needed for rack mounting the IED in a 19" equipment frame. In
addition to the detailed mounting instructions, the mounting kit includes:
Section 4 1MRS756375 K
Mounting
32 615 series
Installation Manual