ABB Relion 615 series - Page 48

1
D
E
A
B
C
A
GUID-7D44F5DE-6452-455A-8076-2A67FD463CC7 V1 EN
Figure 27: New panel cut-out and screw hole dimensions for replacing
two SP_J3 series relays
A 155 mm 1 New panel cut-out line
B 15 mm
C 196 mm
D Min. 165,5 mm
E Min. 161,5 mm
2.
Drill new screw holes (∅4.5 mm) to the panel according to the dimensional
drawing.
3. Mount the installation plate to the panel cut-out with M5 thread forming screws.
Section 4 1MRS756375 K
Mounting
40 615 series
Installation Manual