ABB Relion 615 series - Replacing a Strömberg SP_J3;J6 Series Relay in 19 Rack by a 615 Series IED

1
2
GUID-24CF4D5D-1EAE-487A-A1DE-557DF59658B0 V1 EN
Figure 28: Installation plate for replacing two SP_J3 relays
1
Installation plate
2 Torx head screw M5x10
4. Tighten the screws.
5. Mount the new IED.
For ordering numbers, see the ordering number table.
4.3.12 Replacing a Strömberg SP_J3/J6 series relay in 19" rack
by a 615 series IED
1. Mount the installation plate to the existing panel cut-out with M6 screws and
nuts.
Use the existing screw holes.
1MRS756375 K Section 4
Mounting
615 series 41
Installation Manual