ABB Relion 615 series - Replacing Three BBC S_ Series Relays by a 615 Series IED

11
22
GUID-2B059F45-1287-4D8D-92A6-E6583B0ADAEB V1 EN
Figure 32: Installation plate for replacing SP_J6 relay
1
Installation plate
2 Torx head screw M5x10
3. Tighten the screws.
4. Mount the new IED.
For ordering numbers, see the ordering number table.
4.3.14 Replacing three BBC S_ series relays by a 615 series IED
1. Make a new panel cut-out to the existing mounting panel according to the
dimensional drawing.
1MRS756375 K Section 4
Mounting
615 series 45
Installation Manual