ABB Relion 615 series - Replacing a SPA 300 Series Relay in 19 Rack by a 615 Series IED

11
22
GUID-A8741360-1066-494D-9340-3DA0AF81E778 V1 EN
Figure 37: Installation plate for replacing SPA 300 relay
1
Installation plate
2 Torx head screw M5x10
4. Tighten the screws.
5. Mount the new IED.
Use a raising frame if needed.
For ordering numbers, see the ordering number table.
4.3.16 Replacing a SPA 300 series relay in 19" rack by a 615
series IED
• Mount the IED with the mounting frame to the panel cut-out according to the
rack mounting instructions.
No modifications are needed to the panel.
For replacement kit ordering numbers, see the ordering number table.
Section 4 1MRS756375 K
Mounting
50 615 series
Installation Manual