Section 6 Removing, repairing and exchanging
6.1 Product lifecycle
At some point of the product lifecycle, the IED will be upgraded to a next
generation unit. When selecting the original product, already consider the
upgrading and extension possibilities that the specific product offers for its whole
lifecycle.
IED-specific options can be found from Retrofit Solutions Database on the Internet
www.abb.com by following the links within ABB Service Guide or via ABB
Product Guide from the product specific Service & Support sheet.
6.2 Checking IED information
The IED information includes detailed information about the device, such as
version and serial number. The IED information is shown on the display for a few
seconds when the device starts up. The same information is found also in the IED
menu.
1. Select Main Menu/Information.
2. Select a submenu with
and .
3. Enter the selected submenu with
.
4. Browse the information with and .
The Product identifiers submenu contains product related information like
product type, serial number, order number, production date, configuration name,
SW version, SW date and HW revision.
The Site identifiers submenu contains information about the site where the IED
has been installed.
The HW modules submenu contains information about the HW modules.
The System identifiers submenu contains the unique Technical key which cannot
be changed.
1MRS756375 K Section 6
Removing, repairing and exchanging
615 series 63
Installation Manual
To Next Page
Loading...
