ABB Relion 615 series - LD0.LPHD1 IED Warm Reset; LD0.LSHDPTRC1 Load Shedding (1) Controls; LD0.LSHDPTRC2 Load Shedding (2) Controls

0xA CS IEC 61580 name SA name Description Values
LD0.CMSTA1
2069 2.09 .RecRs.Oper.ctlVal Reset max current1 demands 1=Reset
LD0.PEMMXU1
2070 2.10 .SupDmdRs.Oper.ctlVal Reset energy values 1=Reset
LD0.SCCBR1
2071 2.11 .RsTrvTm.Oper.ctlVal Reset CB travel time 1=Reset
2072 2.12 .RsSprChaTm.Oper.ctlV
al
Reset CB spring charge time 1=Reset
LD0.RESCMSTA1
2073 2.13 .RecRs.Oper.ctlVal Reset Io (1) max demands 1=Reset
LD0.RESVMSTA1
2074 2.14 .RecRs.Oper.ctlVal Reset Uo (1) max demands 1=Reset
2.3.3.3 LD0.LPHD1 IED warm reset
Table 125: LD0.LPHD1 IED warm reset
0xA CS IEC 61580 name SA name Description Values
LD0.LPHD1
2080 3.00 .RsDev.Oper.ctlVal Warm reboot of IED 1=Reboot
2.3.3.4 LD0.LSHDPTRC1 Load shedding (1) controls
Table 126: LD0.LSHDPTRC1 Load shedding (1) controls
0xA
CS IEC 61580 name Description Values
LD0.LSHDPTRC1
2084 3.04 .ManRest.Oper.ctlVal Manual restore 1=Restore
2085 3.05 .BlkRest.Oper.ctlVal Cancel restore 1=Cancel
2.3.3.5 LD0.LSHDPTRC2 Load shedding (2) controls
Table 127: LD0.LSHDPTRC2 Load shedding (2) controls
0xA
CS IEC 61580 name SA name Description Values
LD0.LSHDPTRC2
2086 3.06 .ManRest.Oper.ctlVal Manual restore 1=Restore
2087 3.07 .BlkRest.Oper.ctlVal Cancel restore 1=Cancel
Section 2 1MRS757057 B
Modbus data mappings
66 REU615
Point List Manual