ABB Relion 615 series - Relay Control, Resetting, and Functionality Changes

6.2 Controlling
6.2.1 Controlling via the control menu
The primary equipment can be controlled via the LHMI with the Open and Close buttons
when the protection relay is set to the local-control mode and accessing the control
operations is authorized.
1.
Press
to open or to close the object.
•
If there are several controllable objects, select the object with and and
press to confirm the selection.
GUID-B44E0D8C-22B9-4BA4-8BE7-2C4EE9AA85F7 V1 EN
Figure 66: Selecting a controlled object
2.
To confirm the operation, select Yes and press .
Section 6 1MAC054853-MB B
Operating procedures
98 615 series ANSI
Operation Manual