Fault indication Fault code Additional information
Internal Fault
FPGA error
83 Error in the FPGA on the CPU card.
Internal Fault
RTC error
84 Error in the RTC on the CPU card.
Internal Fault
RTD card error,X130
96 RTD card located in slot X130 may have
permanent fault. Temporary error has
occurred too many times within a short
time.
Internal Fault
COM card error
116 Error in the COM card.
7.2.2 Warnings
Warnings are indicated with the text Warning additionally provided with the name of the
warning, a numeric code and the date and time on the LHMI. The warning indication
message can be manually cleared.
If a warning appears, record the name and code so that it can be provided
to ABB customer service.
A071222-ANSI V1 EN
Figure 81: Warning
1MAC054853-MB B Section 7
Troubleshooting
615 series ANSI 113
Operation Manual
To Next Page
Loading...
