ABB Relion 615 series - Relay Parametrization

A071150 V3 EN
Figure 92: Active setting group
2.
Select the setting group with or .
3.
Press
to confirm the selection or to cancel.
A071152 V3 EN
Figure 93: Selecting the active setting group
4. Commit the settings.
Remember to document the changes you make.
8.4.4.2 Relay parametrization
Protection relay parameters are set via the LHMI, WHMI or PCM600.
Section 8 1MAC054853-MB B
Commissioning
142 615 series ANSI
Operation Manual