ABB Relion 615 series - Adjusting the Display Contrast

A071158-ANSI V2 EN
Figure 14: Selecting a submenu
3.
Enter the submenu with .
4.
Browse the information with
and .
A071160-ANSI V2 EN
Figure 15: Protection relay information
4.1.6 Adjusting the display contrast
Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
and .
•
To decrease the contrast, press simultaneously and .
The selected contrast value is stored in the non-volatile memory if you are logged in and
authorized to control the protection relay. After an auxiliary power failure, the contrast is
restored.
1MAC054853-MB B Section 4
Using the HMI
615 series ANSI 43
Operation Manual