Function IEC 61850 IEC 60617 ANSI
MAPGAPC17 MAP (17) MAP (17)
MAPGAPC18 MAP (18) MAP (18)
Automatic switch-on-
to-fault logic (SOF)
CVPSOF1 CVPSOF (1) SOFT/21/50 (1)
Voltage vector shift
protection
VVSPPAM1 VS (1) 78V (1)
Directional reactive
power undervoltage
protection
DQPTUV1 Q> -> ,3U< (1) 32Q,27 (1)
DQPTUV2 Q> -> ,3U< (2) 32Q,27 (2)
Underpower protec-
tion
DUPPDPR1 P< (1) 32U (1)
DUPPDPR2 P< (2) 32U (2)
Reverse power/direc-
tional overpower pro-
tection
DOPPDPR1 P>/Q> (1) 32R/32O (1)
DOPPDPR2 P>/Q> (2) 32R/32O (2)
DOPPDPR3 P>/Q> (3) 32R/32O (3)
Three-phase underex-
citation protection
UEXPDIS1 X< (1) 40 (1)
UEXPDIS2 X< (2) 40 (2)
Low-voltage ride-
through protection
LVRTPTUV1 U<RT (1) 27RT (1)
LVRTPTUV2 U<RT (2) 27RT (2)
LVRTPTUV3 U<RT (3) 27RT (3)
Rotor earth-fault pro-
tection
MREFPTOC1 Io>R (1) 64R (1)
High-impedance dif-
ferential protection
for phase A
HIAPDIF1 dHi_A> (1) 87A (1)
High-impedance dif-
ferential protection
for phase B
HIBPDIF1 dHi_B> (1) 87B (1)
High-impedance dif-
ferential protection
for phase C
HICPDIF1 dHi_C> (1) 87C (1)
Circuit breaker uncor-
responding position
start-up
UPCALH1 CBUPS (1) CBUPS (1)
UPCALH2 CBUPS (2) CBUPS (2)
UPCALH3 CBUPS (3) CBUPS (3)
Three-independent-
phase non- direction-
al overcurrent protec-
tion, low stage
PH3LPTOC1 3I_3> (1) 51P-1_3 (1)
PH3LPTOC2 3I_3> (2) 51P-1_3 (2)
Three-independent-
phase non- direction-
al overcurrent protec-
tion, high stage
PH3HPTOC1 3I_3>> (1) 51P-2_3 (1)
PH3HPTOC2 3I_3>> (2) 51P-2_3 (2)
Table continues on the next page
Introduction 1MRS757644 H
30 620 series
Technical Manual