ABB Relion 620 Series - Page 114

A071222-ANSI V1 EN
Figure 78: Warning
Table 21: Warning indications and codes
Warning indication Warning code Additional information
Warning
System warning
2 An internal system error has occurred.
Warning
Watchdog reset
10 A watchdog reset has occurred.
Warning
Power down det.
11 The auxiliary supply voltage has dropped
too low.
Warning
IEC61850 error
20 Error when building the IEC 61850 data
model
Warning
Modbus error
21 Error in the Modbus communication
Warning
DNP3 error
22 Error in the DNP3 communication
Warning
Dataset error
24 Error in the Data set(s)
Warning
Report cont. error
25 Error in the Report control block(s)
Warning
GOOSE contr. error
26 Error in the GOOSE control block(s)
Warning
SCL config error
27 Error in the SCL configuration file or the file
is missing
Warning
Logic error
28 Too many connections in the configuration
Warning
SMT logic error
29 Error in the SMT connections
Warning
GOOSE input error
30 Error in the GOOSE connections
ACT error 31 Error in the ACT connections
Table continues on next page
Section 7 1MAC456939-IB D
Troubleshooting
106 620 series ANSI
Operation Manual