A071168-ANSI V2 EN
Figure 87: Selecting the setting group value
Only values within the selected setting group can be changed.
7.
Press
or to change the value and to confirm the selection.
A070922-ANSI V2 EN
Figure 88: Editing the setting group value
The active setting group is indicated with an asterisk * .
Activating a setting group
Protection relay settings are planned in advance for different operation conditions by
calculating setting values to different setting groups. The active setting group can be
changed by the protection relay application or manually from the menu.
1.
Select Main menu/Settings/Setting group/Active group and press .
1MAC456939-IB D Section 8
Commissioning
620 series ANSI 133
Operation Manual
To Next Page
Loading...
