IEC 61850 or
function name
ANSI Function description Generator
REG670
(Customized)
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC 60870-5-103 50
I103POSCMD IED commands with position and select for IEC
60870-5-103
50
I103POSCMDV IED direct commands with position for IEC 60870-5-103 50
I103IEDCMD IED commands for IEC 60870-5-103 1
I103USRCMD Function commands user defined for IEC 60870-5-103 4
Secondary system
supervision
CCSSPVC 87 Current circuit supervision 0-5
FUFSPVC Fuse failure supervision 0-3
VDSPVC 60 Fuse failure supervision based on voltage difference 0-2
Logic
SMPPTRC 94 Tripping logic 12
SMAGAPC General start matrix block 12
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
WRNCALH Logic for group warning 5
INDCALH Logic for group indication 5
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMORY,
SRMEMORY,
TIMERSET, XOR
Basic configurable logic blocks (see Table
3) 40-420
ANDQT,
INDCOMBSPQT,
INDEXTSPQT,
INVALIDQT,
INVERTERQT,
ORQT,
PULSETIMERQT,
RSMEMORYQT,
SRMEMORYQT,
TIMERSETQT,
XORQT
Configurable logic blocks Q/T (see Table
5) 0-1
Table continues on next page
1MRK 502 071-UUS A Section 2
Application
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 51
Application manual
To Next Page
Loading...
