Protection cover
M15040-3 v8
Protective cover for rear side of RHGS6, 6U, 1/4 x 19” Quantity: 1MRK 002 420-AE
Protective cover for rear side of terminal, 6U, 1/2 x 19” Quantity: 1MRK 002 420-AC
Protective cover for rear side of terminal, 6U, 3/4 x 19” Quantity: 1MRK 002 420-AB
Protective cover for rear side of terminal, 6U, 1/1 x 19” Quantity:
1MRK 002 420-AA
External resistor unit
SEMOD120228-4 v9
High impedance resistor unit with resistor and voltage dependent resistor 20-100V,
1ph
Quantity
:
1 2 3
RK 795 101-MA
High impedance resistor unit with resistor and voltage dependent resistor 20-100V,
3ph
Quantity
:
RK 795 101-MB
High impedance resistor unit with resistor and voltage dependent resistor
100-400V, 1ph
Quantity
:
1 2 3
RK 795 101-CB
High impedance resistor unit with resistor and voltage dependent resistor
100-400V, 3ph
Quantity
:
RK 795 101-DC
Combiflex
IP15161-1 v1
Key switch for settings
SEMOD130356-4 v7
Key switch for lock-out of settings via LHMI Quantity: 1MRK 000 611-A
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
SEMOD130267-5 v8
Mounting kit
Side-by-side mounting kit Quantity:
1MRK 002 420-Z
Configuration and monitoring tools
IP15162-1 v2M15042-3 v5
Front connection cable between LHMI and PC Quantity: 1MRK 001 665-CA
SEMOD131414-4 v4
LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA
LED Label special paper Letter, 1 pc Quantity: 1MRK 002 038-DA
Manuals
M15161-3 v16
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual,
Technical manual, Installation manual, Commissioning manual, Application manual and Getting
started guide), Connectivity packages and LED label template is always included for each IED.
Line differential protection RED670
1MRK 505 379-BEN N
Hitachi Power Grids 179
© Copyright 2017 Hitachi Power Grids. All rights reserved
To Next Page
Loading...
