ABB Relion 670 series - Writing User Management Settings to IED; Reading User Management Settings from IED

IEC12000157-3-en.vsd
IEC12000157 V3 EN-US
Figure 14: Entering the password
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 shall be used in user names. User
names are not case sensitive. For passwords see the Password policies in
PCM600.
7.
Select OK on the on-screen keyboard and press to stop editing the password.
8.
Select OK in the Log on dialog and press to confirm the login, or press or Cancel
to cancel the procedure.
If the login fails, a message is displayed on the display.
IEC12000158.vsdx
IEC12000158 V4 EN-US
Figure 15: Error message indicating an incorrect password
If a false password is entered three times, the login is blocked for that ID and the
following message is displayed:
IEC13000283-1-en.vsdx
IEC13000283 V1 EN-US
Figure 16: Error message indicating blocked ID
The logon dialog appears if the attempted operation requires another
level of user rights.
Once a user is created and written into the IED, login is possible with the
password assigned in the tool. If there is no user created, an attempt to
login causes the display to show a corresponding message.
IEC12000160-2-en.vsd
IEC12000160 V2 EN-US
Figure 17: No user defined
1MRK 500 127-UEN D Section 5
Using the HMI
670 series 33
Operation manual