ABB Relion 670 series - Page 67

IEC18000088-1-en.vsdx
IEC18000088 V1 EN-US
Figure 46: Confirm clear through fault reports
3. Click on the Yes button to confirm the deletion.
The through fault reports are deleted from the IED, and a confirmation dialog box
appears.
IEC18000089-1-en.vsdx
IEC18000089 V1 EN-US
Figure 47: Clear through fault reports confirmation window
In order to delete through fault reports for all function instances from an
IED, select All option from the through fault monitoring selection combo
box.
Authentication pop-up dialog box is displayed if external users (CAM/
UAM) are defined in the IED. The roles with IEDCmd – Advanced right are
allowed to clear through fault reports from an IED via PCM600.
Exporting through fault reports files
GUID-63BAF274-FC37-4416-819B-D9973FC103F4 v1
Proceed as follows to export through fault reports files from the IED via PCM600:
1.
Click on the export reports option from the tool bar to export report files from the
IED.
A confirmation message appears upon exporting the through fault reports files from an
IED.
IEC18000090-1-en.vsdx
IEC18000090 V1 EN-US
Figure 48: Export reports confirmation window
1MRK 500 127-UEN D Section 7
Operating procedures
670 series 61
Operation manual