ABB Relion 670 series - Writing User Management Settings to IED; Reading User Management Settings from IED

IEC 61850 or
function name
ANSI Function description Transformer
RET670
(Customized)
CCSSPVC 87 Current circuit supervision 0-6
FUFSPVC Fuse failure supervision 0-4
VDSPVC 60 Fuse failure supervision based on voltage difference 0-2
DELVSPVC 7V_78V Voltage delta supervision, 2 phase 4
DELISPVC 71 Current delta supervision, 2 phase 4
DELSPVC 78 Real delta supervision, real 4
Logic
SMPPTRC 94 Tripping logic 12
SMAGAPC General start matrix block 12
STARTCOMB Start combinator 32
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
WRNCALH Logic for group warning 5
INDCALH Logic for group indication 5
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMORY,
SRMEMORY,
TIMERSET, XOR
Basic configurable logic blocks (see Table
3) 40-420
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMOR
Y,
SLGAPC,
SRMEMORY,
TIMERSET,
VSGAPC, XOR
Extension logic package (see Table
7) 0-1
FXDSIGN Fixed signal function block 1
B16I Boolean to integer conversion, 16 bit 18
BTIGAPC Boolean to integer conversion with logical node representation, 16 bit 16
IB16 Integer to Boolean 16 conversion 24
ITBGAPC Integer to Boolean 16 conversion with Logic Node representation 16
TEIGAPC Elapsed time integrator with limit transgression and overflow supervision 12
INTCOMP Comparator for integer inputs 30
REALCOMP Comparator for real inputs 30
HOLDMINMAX Hold minimum and maximum of input 20
INT_REAL Converter integer to real 20
CONST_INT Definable constant for logic functions 10
INTSEL Analog input selector for integer values 5
Table continues on next page
1MRK 504 165-UUS Rev. J Section 3
A
vailable functions
Transformer protection RET670 33
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved